Join the 155,000+ IMP followers

smartbuildingmag.com

Wireless Mesh Networking for Retrofit Building Automation

Styrvel licenses the NeoCortec NeoMesh protocol stack to connect battery-powered room sensors and radiator thermostats in existing commercial buildings without cabling.

  www.neocortec.com
Wireless Mesh Networking for Retrofit Building Automation

Danish building automation developer Styrvel has signed a software licensing agreement for NeoMesh, the ultra-low-power, bi-directional wireless mesh networking protocol stack from NeoCortec, as announced at electronica 2026 (10 to 13 November 2026, Messe München, Munich). NeoMesh provides the wireless communication layer of Styrvel’s retrofit platform for heating and indoor climate control in existing commercial buildings.

The retrofit challenge in existing buildings
Adding automation to existing commercial buildings usually means installing new communication infrastructure, either cabling or, in many wireless systems, dedicated repeaters. Both add installation effort and cost. For retrofit installations, installation cost, scalability and battery lifetime are therefore key requirements when selecting a wireless technology.

Partners and their roles
NeoCortec, founded in 2007, develops NeoMesh, a wireless communication protocol embedded in smart devices to enable communication between devices and to the cloud. NeoMesh is available on ultra-low-power, bi-directional wireless mesh communication modules and under licence on a range of chipsets. Styrvel develops a wireless retrofit building automation platform for existing commercial buildings. Its battery-powered devices, including room sensors and electronic radiator thermostats, communicate with a building gateway via NeoMesh.

How NeoMesh supports large battery-powered networks
NeoMesh forms a self-organising mesh network that can support large numbers of battery-powered devices without cabling or dedicated repeaters. In a mesh topology, messages are relayed between nodes, so network coverage grows with the installed devices rather than requiring separate infrastructure. NeoCortec states that NeoMesh was developed to overcome limitations of protocols such as Zigbee, Z-Wave, Bluetooth and Thread in terms of scalability in the number of devices, range and power consumption.

“For Styrvel, the key value of NeoMesh is that it allows us to build large-scale building automation without adding new communication infrastructure throughout the building,” says Cato Skibsted Fagermo, Founder and CEO of Styrvel. “This supports our ambition to make retrofit building automation simpler to install and economically attractive for a much larger share of existing buildings.”

Expected impact for building operators
No quantified results have been published. The benefits follow from the architecture: avoiding new cabling reduces installation work in occupied buildings, battery operation allows sensors and thermostats to be placed where no power supply is available, and a self-organising network simplifies commissioning and later expansion. Together, these factors aim to make automated heating and indoor climate management practical for a larger share of the existing commercial building stock.

Edited by Sucithra Mani, Induportals editor – adapted by AI.

www.neocortec.com

  Ask For More Information…

LinkedIn
Pinterest

Join the 155,000+ IMP followers