smartbuildingmag.com
20
'26
Written on Modified on
Carbon footprint in buildings and thermal insulation
ANDIMAT, UNE and AENOR explained how Spain's DB HSA building code will require carbon footprint declarations for buildings from 2028.
www.cpaccomunicacion.com

The Spanish National Association of Insulation Materials Manufacturers (ANDIMAT) and the Spanish Association for Standardisation (UNE), in collaboration with AENOR, held the technical session "Calculating the carbon footprint of buildings. The impact of insulation" to analyse the forthcoming Basic Document on Environmental Sustainability (DB HSA) of Spain's Technical Building Code (CTE). The new regulation will make it mandatory to calculate the carbon footprint of buildings from 2028 and affects designers, builders and construction product manufacturers.
DB HSA timeline and calculation methodology
The DB HSA transposes the European Energy Performance of Buildings Directive (EPBD 2024/1275) into the Spanish regulatory framework. Its section HSA-1 will regulate the declaration of Global Warming Potential (GWP). From 1 January 2028, the carbon footprint must be calculated and declared in the Energy Performance Certificate of new buildings and of extensions larger than 1,000 m². From 1 January 2030, the obligation will extend to all new buildings. Mandatory maximum carbon emission limits will be introduced later, "although they are still to be defined", according to David Molina, Technical Director of ANDIMAT. The calculation will follow the methodology of the UNE-EN 15978 standard.
Correction factors and the role of EPDs
The DB HSA draft provides for correction factors that penalise generic environmental information compared with specific data. Data from individual or sector Environmental Product Declarations (EPDs) will not be penalised, while generic values will face staggered penalties, from 25% for the Ministry of Housing databases up to 50% for other generic data. Having EPDs prepared in accordance with UNE-EN 15804+A2 therefore directly influences the result of the GWP calculation.
"It is important for designers to know that, when calculating GWP, they can rely on the information that manufacturers will provide about their products through the EPD," Molina clarified.
Thermal insulation in the building life cycle
According to ANDIMAT, thermal insulation solutions are decisive for the overall carbon footprint. By significantly reducing operational energy demand during the use phase, insulation offsets the impact of material manufacturing and becomes a net emission-reduction element over the building's full life cycle. Aitor Aragón, Head of Sustainable Construction and BIM at UNE, highlighted the relevance of UNE-EN 15804+A2 and the complementary Product Category Rules (c-PCR), particularly UNE-EN 16783, which applies to insulation products.
Digital data and independent verification
Aragón linked the Construction Products Regulation (Regulation (EU) 2024/3110) to the digitalisation of environmental information: "Given the massive volume of data that projects will require, structured, machine-readable data formats are needed that can be integrated into BIM environments and feed the future Digital Product Passport (DPP), avoiding the inefficient handling of PDF documents."
Carlos Alonso, GlobalEPD Programme Manager at AENOR, explained the requirements for preparing and independently verifying Type III EPDs under UNE-EN ISO 14025, in relation to Directive (EU) 2024/825 (EmpCo), which prohibits generic environmental claims not backed by third-party certification. "An EPD does not describe a product with adjectives such as 'green' or 'eco-friendly'; it certifies objective figures verified by a third party," Alonso explained.
Preparing the value chain
The session concluded that designers, builders and manufacturers must become familiar with carbon footprint calculation under UNE-EN 15978 and UNE-EN 15804+A2 before the declaration obligations come into force in 2028. The insulation material manufacturers that are members of ANDIMAT will continue developing individual and sector EPDs to provide verified, accurate and non-penalised data.
Edited by Sucithra Mani, Induportals editor – adapted by AI.
www.andimat.es
DB HSA timeline and calculation methodology
The DB HSA transposes the European Energy Performance of Buildings Directive (EPBD 2024/1275) into the Spanish regulatory framework. Its section HSA-1 will regulate the declaration of Global Warming Potential (GWP). From 1 January 2028, the carbon footprint must be calculated and declared in the Energy Performance Certificate of new buildings and of extensions larger than 1,000 m². From 1 January 2030, the obligation will extend to all new buildings. Mandatory maximum carbon emission limits will be introduced later, "although they are still to be defined", according to David Molina, Technical Director of ANDIMAT. The calculation will follow the methodology of the UNE-EN 15978 standard.
Correction factors and the role of EPDs
The DB HSA draft provides for correction factors that penalise generic environmental information compared with specific data. Data from individual or sector Environmental Product Declarations (EPDs) will not be penalised, while generic values will face staggered penalties, from 25% for the Ministry of Housing databases up to 50% for other generic data. Having EPDs prepared in accordance with UNE-EN 15804+A2 therefore directly influences the result of the GWP calculation.
"It is important for designers to know that, when calculating GWP, they can rely on the information that manufacturers will provide about their products through the EPD," Molina clarified.
Thermal insulation in the building life cycle
According to ANDIMAT, thermal insulation solutions are decisive for the overall carbon footprint. By significantly reducing operational energy demand during the use phase, insulation offsets the impact of material manufacturing and becomes a net emission-reduction element over the building's full life cycle. Aitor Aragón, Head of Sustainable Construction and BIM at UNE, highlighted the relevance of UNE-EN 15804+A2 and the complementary Product Category Rules (c-PCR), particularly UNE-EN 16783, which applies to insulation products.
Digital data and independent verification
Aragón linked the Construction Products Regulation (Regulation (EU) 2024/3110) to the digitalisation of environmental information: "Given the massive volume of data that projects will require, structured, machine-readable data formats are needed that can be integrated into BIM environments and feed the future Digital Product Passport (DPP), avoiding the inefficient handling of PDF documents."
Carlos Alonso, GlobalEPD Programme Manager at AENOR, explained the requirements for preparing and independently verifying Type III EPDs under UNE-EN ISO 14025, in relation to Directive (EU) 2024/825 (EmpCo), which prohibits generic environmental claims not backed by third-party certification. "An EPD does not describe a product with adjectives such as 'green' or 'eco-friendly'; it certifies objective figures verified by a third party," Alonso explained.
Preparing the value chain
The session concluded that designers, builders and manufacturers must become familiar with carbon footprint calculation under UNE-EN 15978 and UNE-EN 15804+A2 before the declaration obligations come into force in 2028. The insulation material manufacturers that are members of ANDIMAT will continue developing individual and sector EPDs to provide verified, accurate and non-penalised data.
Edited by Sucithra Mani, Induportals editor – adapted by AI.
www.andimat.es

